...
Measurements from QR codes are from the bottom of the rebar and are along the ground , (not from the cap).
Measurements are to outer edge of the pot (aka boundary of the species).
“Before” and “Start” refers to the direction of Fourth St. (aka or where BBot BenchBot starts a batch).
“After” and “End” refers to the direction BBot of the creekor the way BenchBot travels during a batch.
“Left” is towards Range 2 Dr or Building 012.
“Right” is towards North Dr or NG.
Photos are provided of pot spacing around each QR code for additional help positioning.
Species #1 (White Clover)
Starting Edge | Ending Edge | Left Edge | Right Edge |
|---|---|---|---|
60.5” before QR48 | 3” after QR2 | 3” left of QR1 | 7” right of QR48 |
12.5” before QR32 | 52” after QR17 | 73.5” left of QR17 | 79” right of QR32 |
61” before QR17 | 4” after QR33 | 2” left of QR2 | 78” right of QR33 |
14” before QR1 |
.HEIC?version=1&modificationDate=1732035943399&cacheVersion=1&api=v2)
.HEIC?version=1&modificationDate=1732035943030&cacheVersion=1&api=v2)
Species #2 (Turnip)
...
Starting Edge | Ending Edge | Left Edge | Right Edge |
|---|
Start:
16.5” before QR55 |
...
31” after QR39
...
End:
...
27.5” after QR8
...
48.5“ before QR10 |
...
6” after QR56
...
44“ before QR41
...
1” after QR25
Left Edge:
...
73” left of QR24
73” left of QR24 | 9” right of QR55 | ||
31” after QR39 | 6” after QR56 | 2” left of QR9 | 80.5” right of QR40 |
16.5” before QR24 | 44“ before QR41 | 74” left of QR25 |
Right Edge:
...
10” right of |
...
QR56 |
...
27.5” |
...
after QR8 | 1” after QR25 |
