...
If there is an indication the pipeline is finished running, we want to crosscheck the number # of images within the original batch with the number # of jpgs JPGs and pp3s PP3s created.
We can use both of these lines respectively:
...
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/r/raatwell/longterm_images3/field-batches/<batch>/developed-images/*.pp3 | wc -l |
And compare to number # of arws ARWs
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/s/screberg/longterm_images/field-batches/<batch>/*.ARW | wc -l |
As long as the output number # we get from each of these commands are equivalent, we know we have successfully applied the color profile to every image in the batch.
If the number # of jps JPGs and pp3s PP3s are not equivalent to the original number # of images, try running the pipeline again within the screen. Double check the name of the batch that was typed in, this is where errors are likely to happen. Also, be sure to be navigated to the Field folder. If we are within the Semifield folder, the pipeline will run successfully.
Common & Useful Commands
Available batches:
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/r/raatwell/longterm_images3/field-batches/ -lh |
# of arwARW:
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/s/screberg/longterm_images/field-batches/<batch>/*.ARW | wc -l |
# of pp3 PP3 created:
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/r/raatwell/longterm_images3/field-batches/<batch>/developed-images/*.pp3 | wc -l |
# of jpg JPG files processed:
| Code Block | ||
|---|---|---|
| ||
ls /mnt/research-projects/r/raatwell/longterm_images3/field-batches/<batch>/developed-images/*.jpg | wc -l |