...
Before exiting the program, we must apply our the new profile to the rest of the images within in the batch. This can easily be done by:
CRTL+A
Right click
Hovering over Processing profile Operations
Hovering over Apply
Scrolling/Hovering to the desired profile
Selecting profile
Wait for profile to apply to all images
Sometimes, applying to all images takes a bit of time to complete. RawTherapee will not allow clicking out of the selected images or scrolling unless it has finished applying to the selected images. We will know what images have had a new profile applied to them by looking for the There will be a gray check icon in the upper left corner of the individual imageimages, the new profile has been applied.
...
If most images look acceptable and a handful , but some do not, we can choose select images by holding the CTRL key and clicking each image. Once all are selected, find the tab labeled “Batch Edit” on the right-side panel. Stick with toggling Toggling the same sliders we changed from earlier. Do this until satisfied with the results. No need to re-save anything. As long as every imaged image within the batch’s folders of our batch have the grey check mark, we are ready it is okay to exit RawTherapee and send the batch into the pipeline.
3. Running the pipeline
...
When the color profile has been saved, we must send it through it is time to send the batch into the pipeline. Be sure Navigate to be navigated to the Field folder and make if not already there. Make a new screen, use . Use uppercase r (-R) to create a new screen. If returning to an already existing screen, use lowercase r (-r) with the appropriate screen name.
...
If there is an indication the pipeline is finished running, we want to crosscheck the # of images within the original batch with the # of JPGs and PP3s created.
...