...
We want to use an image with a color checker, if one is available within the batch. Choose the most average looking picture (lighting and color-wise).
...
*In Field applications, a large Color Checker is typically used. The Semifield Color Checker might be used instead, but the larger one is preferred for this application. Either is acceptable.
...
Exposure Compensation & Highlight Compression
These two go hand-in-hand. Exposure compensation should always be set to slightly more than Highlight Compression
Lightness
Has a similar effect to Exposure Compensation
Saturation
Toggle keeping in mind the intensity of colors on the color checker.
2.24
...
Save, apply,
...
adjust,
...
exit
...
Before exiting the program, apply the new profile to the rest of the images in the batch. This can easily be done by:
...
If the # of JPGs and PP3s are not equivalent to the original # of images, try running the pipeline again within the same screen. Double check the name of the batch that was typed in, this is where errors are likely to happen. Also, be sure to be navigated to the Semifield folder. If navigated to the Field folder, the pipeline will not be successful.
Example: TX_2023-09-29
Step 1 : Cross-check the original image count to the Backlog spreadsheet
| Code Block |
|---|
ls /mnt/research-projects/r/raatwell/longterm_images3/field-batches/<batch>/developed-images/*.pp3 | wc -l |
The output number should equal the sum of the batch (if applicable: add 01+02+02, etc.)
Common & Useful Commands
Available batches:
...