Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Current »

Physical setup.
Heights of camera and print head

Makes sure everything is square and won’t move

Software setup
Measure distances. Frame length. Spray to frame centre.
Align software grids with spray pattern

Calibration
Tweak velocity based on under over overshooting in centre
Adjust pix per meter if aim is off at top or bottom of frame

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.